[SOLVED] - Stuck at 30Hz on 4k monitor | Tom's Hardware Forum
I recently bought a 32" Samsung 4k monitor (Samsung UHD UJ590), and I just realized I'm only getting 30Hz refresh rate at 4k, which is difficult to use for work and impossible to use for...
My monitor's Hz only go up to 30 when advertised to go up to 100 - Reddit
Your laptop's HDMI port is 1.4b spec which doesn't have enough bandwidth to properly run that monitor, it also doesn't support display port though the USB-C port, so don't bother trying that.
Why is my monitor only displaying at 30Hz when both the monitor and ...
If you're stuck at 4K resolution with a refresh rate of 30Hz on your PC, there are steps you can take to achieve 60Hz. Initially, check your display settings to ensure the refresh rate is set to 60Hz. Then, consider updating your motherboard BIOS and graphics drivers.
Getting the Best Visuals: Fixing 4K Monitor Stuck At 30Hz
4K Monitor Stuck At 30Hz is a common phenomenon. There are several factors that can cause a monitor to be stuck at 30Hz, such as hardware compatibility, cable quality, driver issues, and settings misconfigurations.
Monitor is stuck a 30 hz - Samsung Community - 3218630
You can first make sure that the refresh rate on the MacBook is on 60 Hz in the Mac settings. You can also try to change your monitor settings if available on your specific one.
Extended monitor has refresh rate 30hz only - HP Support Community
Is there any chances to get my extended 4k monitor have 60hz refresh rate to avoid the lagging? The screen and mouse cursor is really lagged when moving around on the extended screen.
P2415Q, 4K HDMI refresh rate is still 30Hz | DELL Technologies
I know this is an old thread, but my P2715Q monitor is showing the highest refresh rate to be 30 hz. It won't let me change it to anything higher. I'm not fluent in technology but it says the monitor is connected to the "Intel (R) HD Graphics P630" display adapter, even though I have another one.
Is it normal to have a monitor that can display 4K but can only do it ...
Earlier versions of HDMI and DisplayPort only supported 30Hz for 4K, so yes, it was common for a period of time. You need at least HDMI 2.0 and/or DisplayPort 1.2 for 4K 60Hz.